Pressureangle

Just finished the 10k on the 1100 sport i. Started out with Bridgestone T30 EVOs on both ends; 120/60F and 170/70R. I never liked the way the BSs felt- the guys at the spine raid can attest my tentative trust in them at lower speeds. That said, they are DEAD STABLE above 60mph. Any road surface, any corner, any speed. I never fully trusted the front, but I got 6700 miles out of it, and because the Triumph dealer in Tracy, CA wouldn't work on the bike, I got to ride The Crossroads on a worn slap-out front; when I came out of that 200 extra miles it had obliterated any evidence of tread on the 45* area. Never slipped, never bounced, never scared me. But never made me love it. The rear was pretty well worn in the center, but looked like new on the sides- my style tends to abuse the front coming into corners and ease on out. Overall, they lasted well, did a great job, and were, in retrospect, the better tires going across the fast ugly parts of OK and KS than were the Pirelli Angel GTs going across the Southern flats. Installed Pirellis in San Jose. Holy crap what an enormous difference in handling. Immediate security, trust, feedback. I'd say better traction, but I never pushed the Bridgestones to the point of slipping so I can't say that definitively. The P's were, at all speeds, easier to maneuver and point- although straight-line stability wasn't as good; I had to be constantly conscious of the weight on the bars and accidental inputs. Sizes were 120/70F 160/60R. The smaller rear took 3mph off my speed/rpm, which cost me a 6 mile shortage to gas in NM...well I did pay extra for roadside assistance just for that case. Overall, I like the Pirelli's far better any time there's not straight road. I can't comment so much on their endurance, 3500 miles of flat straight roads behind 500 miles of SoCal curves only left a noticeable but not unexpected levelling of the center of the rear. Based on the same point in the BS rear on the way out, I'd say the Pirelli rear will go slightly less under the same circumstances, maybe 6k miles. Pressures were 32/32 for the entire trip. I chose the only set of tires I could find in town on the shelf, if they'd been available I'd have gone with a larger rear, but I don't know if that's available or how it would affect the handling. Beware the next spine raid lol

Oh, and I had to truncate the Southwest/Texas/FL Panhandle parts because I ran out of time. Next one will be out to L.A. and back, at least, spending time in SoCal, Phoenix, Tucson, etc. Stay tuned.

8 weeks, 10,000 miles. I need another month and another 5k miles. Nobody tells you that when you take something out of the bucket list, you might like it. This could be a lifestyle. Travel light, travel fast. No other motorcycle I've ever owned would have been better for this trip. Yes, a touring bike would have been nice across Oklahoma and Kansas, and home across the South. But I knew that would suck, and a touring bike would only have sucked less. The rest of the time, what a gas. Wore the front tire completely bald where those 70mph sweepers are (stories to follow) I have about a terabyte of video I'll be reviewing, editing, and posting up.

Went with Pirelli Angel GT, since it was the only pair in stock that fit- 120/70 front and 160/60 rear. We'll see.

Just passed 6500 miles on my 97 sport I (17" rear) with Bridgestone Touring T30's. I'm very pleased overall with mileage and performance. From damp tight roads in Tennessee at the spine raid to 90mph sweepers in Montana/West, they never gave a moment's concern for traction, all the way to the bottom of the traed (I rode 150 crazy miles after I wanted to change the front) The only meh was always feedback, which never let me feel truly confident. They are much more reassuring as speed increases, secure and stable at high speeds and lean angles and on any road surface. So. Now I'm in San Francisco, looking at a thousand miles of tight, great sporting roads, and any tire will do the flat miles home after that. Recommendations?

https://www.relive.cc/view/rt10001941948

As soon as I get home, I'm going to work out billet stand mounts. After 4 stand related drops in ~6k miles, I'm thinking about reengineering it so it deploys and retracts 'normally' and stays where you put it. Opinions?

Need a 90* plug cap. Found none today, trying again tomorrow.

A bit of video from hwy 47 in Washington.

Longview, WA

Bill, that's the Mid America museum in Liberal, Kansas.

Made an album, finally. I'll be taking more photos, and I mounted an Innovv K2 camera set so when I get home I'll add some videos. https://photos.app.goo.gl/wXhgvgDFZMhDQaEs8

Yellowstone, Bozeman, Kalispell, Sandpoint Idaho.

Well, crap. U was hoping for a service there in a couple days.

Been moving fast, but did make the Mid America air museum in Liberal, KS. Saw family and friends in Denver/Ft. Collins, Cheyenne rail museum- the U.P. Big Boy will be ready and pull passengers to Promontory point for the 150th of the transcontinental railroad in May...

Sorry LowRyter, zoomed through OKC pretty fast. Rode through Yellowstone today, landed in Bozeman. On to Kalispell tomorrow.

Hey all, I've been on the road and hadn't checked in. What a blast! Wish I'd been there a day earlier. Got to Chattanooga without getting, drizzly and foggy the next day but all smooth sailing since then. I'll not miss the raid again.

I'm 3 hours out, in Commerce, GA. What's the schedule?

Woo Saaa... The universe is telling you that the last .010mm does not matter...

Ok, I'm going to record and post on YouTube content I think worth seeing. I had recorded some of the actual work of installing the Innovv K2 camera system with my GoPro, but the battery pooped out somewhere along the way and I always hated the computer interface and editing of GoPro. So I uploaded the short phone version after everything was mounted and connected. I had to drill/dremel a slot in the fairing behind the RF turn signal to pass the camera cable connector through, but it's invisible after install. The rear camera worked out fine, might chafe the edge of the bodywork over time but if I had more time I'd drill a hole directly in the tail and have a Cyclops view out the back. Maybe some other time. The entire install, not counting cleaning up some other details along the way, took about 4 hours of work time. Without having to think through mounting points etc, this would be easy to do in 2 hours from a standing start. https://www.youtube.com/channel/UCpl1Fo_SKIsno9cA8kVzCsA/featured?view_as=subscriber That link gets you to my channel, where I'll upload any other video along the way. E.

I have a friend in Mesa I need to look up. I think he works in the city garage. I'll deff be in touch.

Oh dooky. Tail of the Dragon is right there too. Hoo boy. I was thinking I'd do that in October. Maybe I will again, if this thing will make 8000 miles.