Weegie

My Daytona which was an early version in the UK had the 2 white clocks, the speedo was in kph with small mph markings on the inside (just like the mph one on that bike has kph markings on the inside) My Magni 1100, esentially a Sporti had that style of speedo though, so I wouldn't rule out that its not original. More likely it's down to what was available in the factory at the time and what the US regulatory bodies were demanding so bikes could be sold there. IMHO its a bit of an eyesore and that speedo style was used on the LM 1000s as I recall. The tach is identical to all the Sportis and Daytonas I've seen too

I didn't find the clutch pull on mine any heavier than other Guzzis, I did notice that the arm onto the gearbox could get gummed up with road debris, possibly due to the larger rear section tyre, so worth checking. As Phil states cable condition and routing also make a big difference. Looks like an early Daytona, the forks on them weren't the best, quite a few replaced them with GSXR forks. The oil pump which is a known weakness, but at that mileage not an immediate concern The standard Daytona didn't suffer from the oil pressure and overheating issues I've had with the C kit cams, so of no concern. The engine is great, totally different in character from a 2 v/v and IMHO a huge amount of fun to ride. Apart from acess as the front being a bit cramped (due to the belts), they are easy to work on as any of the 2 v/v bikes too.

Although I've never owned a V11 I do have a Hi Cam and an R9T (a 2017 Racer). IMHO Pete hits the nail on the head, the boxer engine sounds lame! If you can get over that and the weight, mine feels significantly heavier than the Guzzis, the experience isn't that far apart. I purchased mine as I like retro styled bikes, don't need the power and like the overall simplicity of aircooled twins (especially with protruding jugs). If you're anything like me I'm sure you'll enjoy it. On the other hand you miight be subject to

Can't tell from the dimensions but the mounting holes angles look right. Voltage, power and number of teeth are the correct spec.

Is he not the Cycle World Tech Gnu? Ton of videos out on YouTube where there's a conversation between him and the Editor about various aspects of Motor Cycles I watched the thread on oil as with my HiCam travails I've a passing interest and didn't find any "light bulb" moments. Found the rambling nature of the discussions hard going, but that's just me I guess

I agree and an oil analysis will, most likely, highlight problems sooner than a mechanical issue than a noise or vibration. I thought I said as much in my first post. I don't do it, because it's more expensive in the UK and I very much doubt I'd have the requisite skills to accurately diagnose the exact cause. The cam to valve transmission train as suggested by Phil, the bearing caps, me no clue? All it would tell me is my engine might be developing a problem. Personally I doubt I'd tear an engine down to investigate based on that alone If it was going Dogga Dogga then I would and yes all engines can suddenly go bang, it's all down to known faults and probabilities. All an analysis would do for me is worry and ruin every run out I had.............BUT THAT'S JUST ME If your skills diagnositc skills are better than mine, which honestly would not be hard, great it will then save you time and expense in the long run.+

Generally agree Phil and had similar experience with large gas turbine machines, but power generation, for the majority, in my case. Oil sampling may have a valid application for race engines or if you do Winter maintenance yourself and like tinkering. Perhaps a particular anomally might lead to an investigative tear down to check. After all Guzzis are easy to work on generally and acess good. Better checked in the Winter than tearing down an engine when you could be riding in the summer. Thing is though generally something like our engines will usually give you plenty of other warnings before going ballistic. As for borescopes, these can be had for relatively little money these days too and IMHO also have their uses, even if that is just for peace of mind. Just saying it's horses for courses, I'm probably a little OCD, but I've never been tempted to go down that rabbit hole (yet).

I replaced the OEM alloy gears in my HiCam engine with steel versions from Joe The OEM crank driving gear is steel, but the oil pump and cam were allo I just thought it was prudent, the amount of effort to turn an engine and compress the valve springs said to me that it might not be prudent to have alloy as a suitable material

I know nothing of the systems you're referring to or the V85, I just chimed in response to @ScuRoo comment on the O2 sensor and I've no clue what's on a V85 Most OEM lambdas fitted are narrow band, meaning they only "see" close to Stoichiometric conditions, so they can only sense rich/perfect/lean conditions. AFAIK that then causes a short term fuel trim to start adjusting towards target, but the sensor can only tell the ECU I'm to rich/lean and then an iteration process begins until the sensor detects a different condition. More expensive wide band sensors can tell the ECU the value over a wider range (or band) so the ECU can react to the O2 value, so it's faster and fuel values can be more accurately targeted. No clue with the Guzzis as mine are all ancient open mapped, but some of the Beemers use RpidBike Modules which piggyback the ECU and adjust mapping on the fly. Some modules can use wideband sensors to adjust fuelling to a chosen A/F ratio which can even be seen (if desired) by another add on and targets adjusted on the fly. https://www.dimsport.it/en/rapid-bike/youtune/ Probably of no relevance whatsoever, but thought I'd mention it, apologies if I'm way off topic

I prefer this guy, he's a good bit easier on the ear https://www.youtube.com/@LubricationExplained

I watch "Driving 4 answers" content too Phil and although I knew some of the story, I found that video quite shocking. As for "Stuart Fillingham" the YouTuber on the first post, he's forever posting grossly over exaggerated vids on nefarious beaurocrats coming after yer bikes. Of his videos I've watched they're exagerated and misinformed. I cannot stand his accent nor narration and think he does it to up his views, which I class as duplicitous. One quote from Pete that always made me smile and I'm paraphrasing, ........."If anybody complains, just tell them the bike runs on very old sunshine"

That's a real pity, I'll bet it was beautifully made. Perhaps me getting older, but I just find machines nowadays not nearly so well made

After a few cheaper machines, eventually ended up with a lever unit, which was obscenely expensive and stupidly simple in construction. Its just a boiler, or pressure vessel if you prefer the technical jargon, with tubing to the group head, the group head has a large lever and a take off to the steam wand. You raise the lever to charge the group head with water then a slow steady downward pull forces the water through the basket (and coffee) and into the cup. The boiler runs between 1-1.5 bar and it can only really make one cup at a time and using it takes a bit of practice. The most important point, in my experience, is getting the grinder settings right. I also weigh the beans, for a weaker cup use 12 grams and 15 for a stronger one. When steaming the boiler pressure will drop to around 0.5 bar but for even a larger cup it will happily steam sufficient milk straight out the fridge (4C or so) to 60-65C very quickly and when finished be back up to full pressure in 15-30 seconds. From what I've seen water temp has to be around 85C or thereabouts and extraction pressure of 9bar, although it varies from roast to roast. The reason it can be a bit hit and miss, is you only know the boiler pressure and not the group head, although the machine can be modified to install one. I like a strong cup and dilute it with milk something between a machiato and a cappuchino, makes a cup as good or better than many commercial cafes around here Coffee I currently enjoy is Ueshima, a Japanese brand, my wife likes the lighter roasts from Africa both of which we get from our local supermarket. I spent around 2 years frequently travelling to Italy, both in north and south and can't remember ever having a bad cup of coffee, even though many of them were made on small home sized machines. In every other country I went to, including the UK it was usually the opposite.

I didn't mean the comment to be particularly relevant to your problem, I merely raised it for anybody, perhaps searching for solutions with a similar problem. Anectodally I find copper leads deteriorate over a long period of time, same goes for battery to starter motor cable, of course a lot depends on the quality of the leads/cable. Anyways glad you got sorted and the bikes going well again I wonder how many people these days have analogue meters, I still have an AVO and love it, a beautiful piece of kit

Agree with everything you said In the past though I've had carbon and copper core HT leads return low resistance values, leading me to believe they were good, when hunting misfires and poor running. Eventually after checking everything else and in desperation replacing the HT leads to find that they were the culprit all along. The carbon cores are fragile and I reckon copper ages (oxidation or perhaps the high voltage degrades them in some way?............no idea) reducing the ability of the leads to transmit the high voltage. Just saying if everything else checks out and the leads are old replacing them is worth a shot

Good idea, another mod I've seen is to dimple the stick metal or plastic. Can't help think a flat metal stick would be better, like you used to get on older cars. I purchased the flashlight after losing 3 pints of oil when an oil cooler hose started to leak (you see now why I prefer to overfill). The subsequent Motorcycle Accident Invetigation Team report cited "user ineptitude" as the root cause of the failure. In accordance with the mandatory recommendations both lines were replaced. My main worry was too little oil, as if you're obeying the stick marks waaaaay overfilling isn't an issue with a "Roper Plate" installed One more thing the Australia with its solid belly pan, collects all the oil at the front which then blows rearwards and exits in the vicinity of the rear tyre. Coating the rear tyre with engine lube provides early fault warning, preventing premature engine failure by potentially trashing the whole bike insted.

Not sure if I'm just inept (highly probable) but I've never been able to asses with any confidence the oil level in my 1100 or HiCam engine (both broadsump engines) I've tried the plastic standard dipstick and a metal one, the metal one being slightly better, but I still find it hit and miss. Not that it is really so critical, as now with Pete's sloppage plates in I way overfill the sump past the "high" mark, until the oil is just below the level of the plate (thank you @Lucky Phil for the advice) and never had any problems. Even seeing that though is a little tricky, I usually asses it with the help of a small torch and barbecue stick to see when it touches the oil. Anyway I suppose this is stupidly obvious but I purchased an LED flexi torch and it's great I can put it into the dipstick hole and get a good view of the plate and the oil sitting below it. https://www.amazon.co.uk/dp/B00008BFS6?ref=ppx_yo2ov_dt_b_product_details&th=1

Really? You are familiar with the "In the vicinity of Neutral" warning light on the dash? Perhaps I've been doing it wrong all these years but my hand is always on the clutch prior to starting and I slowly release once the engine is running. Her other hand appears to be close to the starter. I see your point though and I never start a bike on the stand, center or side.

I quite like the aestechics of the engine, the radiator and the collector on the exhaust are a bit ugly but what new model motorcycle isn't and it's a better effort than most. I do agree though it's a bit odd, old school top and newer tech bottom and all that polished alloy is way too blingy for me. The Honda styled seat unit....not offensive, but not to my personal taste either Magni has been doing similar, his designs are not so offensive (at least to my eyes) but I still find the new engines in older style clothes a bit odd

Seen a lot worse!! I'm left wondering if what I've done to my bikes over the years would invoke the wrath of Pete?

That's what is expected if you use an LED, as it's a diode the warning light will only illuminate in one direction only, in the other the LED blocks the current. It's a bit of a faff to put the other diodes in place to get an LED to work. @Kiwi_Roy did publish a diagram somewhere on here to show the mod, but you need to get into the dash and if you're not fussed then by far the easiest solution is just to go back to a bulb

Is this a single indicator light on the dash that doesn't differentiate on LH or RH flasher? If it is and it's wired the same way as most of the other Guzzis of late 90s and early 2000s that I'm aware of (perhaps more models), then I'd check all the earths/grounds on the opposing flasher and all the connections on both indicator circuits and the wiring to the bulb itself. It won't work with an LED unless modified and I'd imagine strange things might occur if the bulb wattage isn't standard either It's a rather fiendish circuit where voltage is applied to the side selected and because the current is low it earths/grounds through the indicator circuits on the other side. Example you select LH flasher voltage is applied to the bulb via the LH circuit and it earths/grounds through the RH circuit. The upshot is that everything in both circuits and the warning lamp too,has to be good, connections, earths/grounds etc for it to work as intended I apologise that it doesn't answer your question precisely, but it's the best I can do for now Oh and if it has a seperate lamp for left and right ignore this post John

Ok now I understand, the reduced current which flows through the circuit when the tank is full and wouldn't light a bulb is still sufficient to illuminate the LED. A resistor in parallel wouldn't work, the easiest solution I can think of then is to use Roy's solution of a resistor in series to limit the current to the point that the LED won't iilluminate. Resistors are cheap, it doesn't cost much to try it and Roy even suggested a value which gives you a starting point. If it kept the LED lit on a full tank, step up the value. A relay in theory would also work, but matching the voltage to get the coil to pickup in the relay sounds like a bit of a nightmare, you'd also have to ensure it dropped out at an appropiate voltage too. I haven't read through the whole thread, but when I looked at that petcock you referenced on the SD page, my first thought was it looks awfully like a float switch, but I don't know Apologies for the misleading information, I'd not understood the problem fully.

The TWA 800 remark was made with my tongue firmly in my cheek and I agree. The idea of mixing components with current passing through them and a potentially explosive atmosphere might sound utterly mad, but could still be safe, it's dependent on a few different variables. I've never heard of any scenario of a tank exploding due to either a fuel pump or low fuel warning sensor failure either @Tinus89 am I missing something here? AFAIK its the properties of the thermistor itself that alters resistance, resulting in a higher current flow for the fixed Voltage across the circuit it has nothing to do with the bulb resistance. The bulb rating is chosen to allow it to be bright enough to be observed, but also to balance/limit the total circuit resistance. If the bulb resistance is too high (i.e. lower wattage) it won't allow enough current to flow and would never light. Too low, would result in too much current and burn out the thermistor. The Thermistor's resistance lowers as it gets hotter, when it's dunked in fuel it's cold and the resistance is high. When it gets uncovered, fuel below the sensor, the thermistor starts to get hot. When it gets hot the resistance lowers, that will also result in self heating (by how much I don't know). I don't understand the difference between using a bulb and an LED plus equivalent resistance, in a purely resistive circuit If I'm talking complete bollocks or missed something feel free to educate me (because I've never been accused of being "the brightest bulb in the building")

If you know the original bulb wattage, I cannot be arsed looking it up, you can easily work out the filament resistance then just wire in a resistor in parallel of the same value and it should work as @Tinus89 has already stated. No rocket science in the circuit, Ducati did the same thing back in the day, probably other Eye-Tal-yin producers. Still freaks me out a near empty tank, full of fumes and an electric current passing through a thermistor in the space. What could possibly go wrong, I mean TWA 800 was a fluke right?