p6x

I am pretty certain that wherever you purchase them, they all come from the same location, probably china. You can probably get everything from Temu or Alibaba cheaper if you are willing to wait for the delivery.

That's the consensus; all the Ducati top management is stating they are working hard behind the scene, to find the technical solution to give Pecco's feeling back on the GP24.9; they referenced last year rear drible problem which was eventually solved. I read on the Spanish news, that Marquez (Marc) would love to see his brother join him on the factory team. It makes sense, but I doubt it will happen. Also because Pecco has a contract until the end of 2026, but Ducati probably needs to keep an Italian rider? As for Pecco in Argentina, he was 0.2 seconds off the lap time set by the Marquez brothers. We will have to wait for Qatar to fully understand where does Pecco stands with regards to Marquez. Qatar is a track that Pecco likes. Meanwhile, I expect COTA to be another repetition of 1 and 2 from the brothers.

Thanks for giving a brand name to this type of washer. By looking it up, I found that the technical appellation is Serrated Safety Washer. It seems not. This is simply incredible that a 0.05$ item costs you up to 50$ with the transport. I am going to make a shopping list of the flowing supplies I need and get all that from France on my next trip. Found them on Amazon, for 11$; they are not the flat type but conical but I am going to get 100 of them for that price. McMaster-Car was 13$ for 5 item + transport at my expense.

This is the problem with not giving your customers the technical definition of a generic part. On the drawing it is item #25; listed as "washer" with Guzzi part number. Instead, it should read: M8 lock washer for socket head screw. Guzzi does not manufacure that part.

Maybe; but I would have expected them to either replace, or if unable, to inform me they could not because they did not have them.

Unfortunately, the tricky to find (here) ones.They are M8 lock washers for socket head screws. I found them at MacMaster-Car. https://www.mcmaster.com/90488A140/ But my goto place here did not have them.

I have downloaded the Spart Parts Catalog from "Thisoldtractor". However, lesson learned. Don't trust anybody to do the right thing. I had a Moto Guzzi dealership install Dunlop Trailmax new tires before I came back from Peoria last year. Maybe I am naive, but I would have expected them to put the wheel back together with all the proper fasteners. They have recently contacted me, to check if I needed more work done; I explained that it is a little out of my way to go to Arizona to do maintenance. I am going to send them an email to let them know what I found missing. Since they were the last one to remove the wheels...

When you don't, you are supposed to get it by doing it. There is no way you can learn to ride properly in two days, when you are starting from scratch. In EUR, you are supposed to get your experience before you get your license, and following it by driving less powerful motorcycles. From what I understand here, in Texas, they explain the basics, you get a not too difficult maniability test, and then you learn to ride a motorcycle on the road.

I did check the part diagram before I started to take the wheel off. The two screws that hold the plate where the brake pad is do not have their lock washers. Not a big deal, I will correct before I put everything back together.

Apparently not "all". I enjoyed reading again Marquez' declaration prior to the commencement of the championship, that Bagnaia was the reference on the Ducati. Today, he said that his number 1 adversary is Alex. This takes nothing from the performance of the combination Marquez A+M and Ducati. Once more, all the bikes from 1st to 5th are the Ducati. With Zarco the first of the "normal" brands. On previous years, it was the Ducati championship. in 2025, it is the Marquez championship too.

Harper's did not give me an ETA. They have written on their website that if they do not give a shipment tracking, it is because they are waiting for Piaggio to send the part. The Quota is extremely sensitive to crosswind. I was last year on that same I-40, and it was gusty. I would have stopped before being flown to Mars... I took my rear wheel down as I also got a flat; when it rains, it pours. I noticed that some washers were missing.

I retook my motorcycle license here in Texas. Just to check the difference. You get your license in one weekend! all the bikes used for the test were 125cc. There is no driving in traffic. Only technical tests, but way easier than those needed in Europe. There was one candidate that was unable to manage changing gears, so he was provided with a scooter so he could pass the test. All the tests could be done in first and second gear, but having a scooter is more simple. No clutch to dose. Only one person failed to get his license. He fell down and decided to stop.

I took a look at the parts section of their website. They only list BMW models, although they talk about Moto Guzzi, but nothing specific. Everything they advertize is BMW oriented.

@GuzziMoto Sooo... 4 out of 4. I am not going to bother going to COTA, since I can already tell it is going to be 6 out of 6. The entire MotoGP is in full damage control! Starting with Marquez (93) swearing that both Bagnaia and Alex (Marquez) are going to win races. This is only a matter of when, and not if. Ducati Tardozzi is also claiming that Bagnaia is extremely close to Marquez! funny, but on the race track, he does not appear to be. Bagnaia is already at minus 31 points from Marc. My only question is: did anyone see that coming? for Dorna, it is a bitter sweet victory. Nobody wants to watch a race where the winner is known before the start. Even Alex Marquez had to swear that he will not hesitate to attack Marc, brother or not. Lol.... Anyway, we shall discuss the MotoGP future afer COTA.

We had the Ducati preamption of the championship; now we need to add the Marquez brothers festival. I have no doubt Marc Marquez will be the lead guy in both the short and long races. Will Alex be second again? I would love for Zarco to make it to the podium, but he often has difficulty at the race launch.

Somethinig to take into consideration; I brought the bike from Arizona, and used it extensively. This gear lever issue happened right after I decided to change the gear shifter position. This morning, I was going to long distance test the latest assembly, but yesterday I caught a nail in the rear tire, and I now need to take off the rear wheel to replace the tube. I have ordered a replacement gear lever from Harper's Moto Guzzi; Incidentally, without the gear lever problem, I would have been in the Panhandle yesterday, where they had high winds, still today.... so, fate!

With the gear lever removed, I could finally understand what was wrong. As you can see in this photo, this is the only position of both splines that will allow the gear lever to slide all the way in. When both parts came undone the first time, I set the shift lever at a different level, to suit my preference; but in the new position, the gear lever female spline would not go all the way in. As I did not know as it was previously, I did not think it would affect anything. As you see in the photo below, I could not get the gear lever further in on the male spline of the shift lever. In the photo below, you can see that the gear lever spline is slightly out of the male spline. It is possible that when you tighten the jaw, you actually make a force that pushes out the gear lever female spline: The photo below shows how the two parts should be connected. Hopefully, I have solved the problem for good. I will reassemble and test that I have solve the crux of the issue.

Harper's; but I don't need it anymore. I have understood why that gear lever came off all the time. I will put the photos for reference. The first time the splines came apart, I put the shift lever in a different position than intially. Because it was too low for my taste. Especially when I rode in terrain, on soft sandy patches, I was standing. Shifting down was easy, but shifting up forced me to go low with the front of my foot. I did not realize, but the gear lever female spline only goes all the way in its original position. This is the reason why it always came undone. Duh.... If you want to adjust the shift lever height, you have to use the gear lever.

Unfortunately, as with EVERY insurances, as long as you pay the premiums, everything goes well. Then when you need assistance, this is when you discover that what you thought was covered, is in fact NOT! With AMA, I paid for the tow option, but I did not know it was restricted to 35 miles. I thought it was "to the nearest dealership". With Guzzi, the nearest dealership may be hundreds of miles away. But the best came after; AMA told me I would not have gotten any roadside assistance anyway, because I needed to register the vehicles that may have needed it. Ahead of time. Did you know that? I asked why don't you request to register at the time you tick the roadside assistance box? the answer was, it is indicated in the Terms and Conditions. This is finnicky. To me, it seems they want to make sure they can get out on technicalities...

I went ahead and purchased it. I do not know if you are aware, but voice calls are now past us. All of the large companies have resorted to robots, so-called powered by A.I.; smaller companies don't answer their phone any longer. They have a recording that provides you with hours of opening or other stuff that is available from Google anyway. The days when you would call to make a reservation for anything are mostly gone. There are a few exceptions, but most of those are no longer the rule. Before, after having exhausted all the run around given to you by the robot, you would eventually get to speak to a human. I found out recently that if none of the options addresses your needs, the call is simply terminated. All the options offered are only handled by the robot, without the need for human intervention. Basically, they may as well have no phone number, as all transactions are handled on the web in any case. Back to Harper's, there was another thread on this forum, where someone had purchased parts from them, had not received them, and could not get in touch either by phone or email. So, I am prepared to lose the 50$ I spent on that part they may not even have. In the meantime, I am going to try a mechanical fix, because I want to rite my Quota. I will start wth the quick simple, and look at drilling a hole for putting an M6 screw to hold the lever in place.

If you go back to the beginning of the thread, the gear lever is item #10 of the drawing. You see the female spline part is split to allow for tightening. However, fatigue makes the two sides in contact, and even when I untight the nut, it stays in the same position. No more elasticity. There are a few mechanical tricks that can be used. Put some very light and think metal around the male spline, force open the "claw", and reassemble. The think metal band will increase the diameter and possibly improve the lateral grip. I have looked for a "Gear Lever", item #10 of the drawing. Part Number 30 25 69 25, with the prefix "GU" so GU30256925. I could not find it anywhere excepted for an outfit named "Parts Republik" in The Netherlands, for a whopping 191 EUR!!! Maybe MPH has something in stock, but they are still in transition.

In fact, no. They don't give you any ball park idea. Simply because it depends which company will be available to assist you. Remember, this is Texas and it is quite grand here. Based on where you break down, they will call the closes assist and depending on many factors, the price can vary. Today my Quota left me without any gear change while I was about 80 miles from home. This time, I had a 10mm spanner and I reassembled the shift lever with the gear lever. In any case, if push had come to shove, I would have set the bike in fourth, and I would have been able to get back to 4 miles away from home without the need to change gears. The rest of the way, in 3rd or 2nd would have worked too. But I have been in remote parts of Texas, and as I said, 35 miles does not get you to any town. Of course, in Europe, you are never far away from civilization.

The shift lever and the gear lever parted again at the spline. I did 269 miles today, and the two components slowly came undone as I kept riding, until the gear lever came off the spline. Since gear change is only by reciprocation, one wonders why the gear lever would slowly move out. I took a closer look at the gear lever claw, and realized that with the nut tightened, the two sides that form the claw are in contact. In other words, you can't tight more than what it was, and it stil comes out. I could drill a hole in the center of the shift lever, at the spline end, tap it, and install an hex screw and a washer so the gear lever would not come out any longer. Or, I could put some mild loctite on the spline, and see if that does the trick? Other ideas? I don't think I can easily find another gear lever. I am still going to look though.

I went through the fine prints of both my Insurance (Progressive) and AMA; Here's the gist: When you are riding in the west of Texas, 35 miles does not get you to any motorcycle shop. Those can only be found in major towns, and in any case, not Moto Guzzi. Overages can be just about anything; How much are we talking about? 500$, 1000$?