biesel

Similar problem - any new solutions?

Any ideas how much taler the bikes with OHLINS are and how to lower them?

Yes it´s a CA.R.C. !

Trailer: Surrogates (Fall 2009) http://www.youtube.com/watch?v=jwTJ7mCcFoY At 2:11/2:12 you can see the Griso.

Here is my translation of its features. I hope I chose the correct technical vocabulary: Engine: - Complete revison ("0 kilometres") - Glass-blasted - High valve covers, polished - Le Mans 1 alternator cover, polished - 942 ccm - Valve train kit "Dynotec - 7906" - "Cosworth" valves, carbo coated - Special valve stem guides - Cylinder heads Le Mans 1/2 - Porting (inlet ports: ø 40 mm, outlet ports improved) - Twin spark ignition - Combustion chambers reworked - Compression ratio 10:1 - Quench area reworked - Oil pressure valve reworked - "Stucchi" chain tensioner - Exact firing and TDC marks - "Agostini" engine ventilation - 40 "Dellorto" carburetors with accelerating pumps and ticklers - "Lafranconi Competizione" Le Mans silencers Gearbox: - Complete revison ("0 kilometres") - Glass-blasted - Intermediate transmission pinned - Cushion converted to cup springs Clutch - "Agostini" aluminium flywheel "super light" - Starter rim lightened Frame: - Frame powdercoated - Polished final drive and wheel hubs - Frame type VG - Fork type 850T3 - Fork dampers with air support - "Koni" spring stuts - "Verlicchi" handlebars "Moto Spezial" - Stainless steel screws, nuts and washers where possible - "Morad" wheels 2,5 x 18" with heavy duty spokes - "Agostini" footrests - Conventional brake system - "Steel-flex" brake lines Electrical equipment - "Silent Hektik" alternator controller - "Silent Hektik" module with circuit breakers and electronic relays - "Silent Hektik - Power Block" ignition system and wires - Small wiring harness Miscellaneous - Aluminium instrument console "Motoschmitz" - Rebuilt "Veglia Borletti"speedo and rev counter with special cables - Taillight bracket "CEV" - Taillight "Moto Spezial" (aluminium) CNC machined - CNC machined cover for the upper triple tree with logo "950S" - 2 colour paint black/orange + white stripes + clear coat - Tank: Le Mans I, side covers: 850T

My 950S has changed a little bit since 2008: - Front: ABM brake discs - Rear: "Moto Spezia"l brake disk - New adustable levers - New brake pads A BIG improvement! - Two-up seat

00:35 - 00:55

I must admit, it does not looks so well from the side: The last image shows the original screen and the 2 pieces I cut off. The first step (1. piece) looked better but it didn´t work for me (turbolences around the neck).

Det var så lidt!

Special MOTO GUZZI Norge 1200 4v: http://www.tucson.it/design/norge4v.htm http://www.tucson.it/design.htm

RED!!! Wows - looks good. My valve covers and "pork chops" were painted ca. 2 years ago with a translucent ink technique (4 layers). The original finish was of bad quality and bleeched over the years.

Hi Søren, I used a Dremel, 60 & 100 emery cloth and adhesive tape (for marking the cutting edge an to avoid scratches). You have to be patient for the job The final step was polishing the cutting edge with "Autosol® Edel-Chromglanz" (Metal Polish)

Frodo´s Brothers Does he have one? I don´t think so. Maybe she looks better with the standard screen ...

Hej Søren, jeg er ... *sorry* I am 172 cm "tall". I also mounted the MRA touring screen => makes a lot of noise & looks fugly! A friend of mine, 202cm tall, also tried the MRA touring screen and even he had problem with noise. MRA also delivers originally-shaped sreens. For a little extra charge they are also willing to make shorter screens.

Smaller drivers sometimes have problems with noisy air turbulences which are caused by larger windscreens. I bought a used windscreen and made some experiments: It helped a bit but really looks ... "different" - what do you think? But I have to admit that my new BMW "Sportintegral" helmet and the DÄS handebars also helped.

"New" images: Monza/TTR

I didn´t create that video

Maybe somebody should hack the Moto Guzzi Website and upload it there.

nice ... Moto Guzzi MGS-01 Strada Luca Bar: Bar-Design ... more images

What happened to Dr. John? Is he a dentist again?

Moto Guzzi Video

Congrats Jaap!!!!!!!!!!!! We are all getting older

MCN - First Test

The 2 Photoshop´ed Bellagios from the Anima Guzzista Forum: