Jimmyegypt

This'll be the source of my oil leak then! Perished and cracked breather hose BOTH ends! Gutsibits to the rescue. Thanks for all your help! Jimmyegypt Sent from my ONEPLUS A6013 using Tapatalk

Comunità Economica Europea - European Economic Community Of course.... The eye is drawn to UK in the frame number. ZGU =Moto Guzzi KR= V11 variant Y =2000 year of manufacture 112219=frame number Sent from my ONEPLUS A6013 using Tapatalk

Thanks Chris [emoji106] Sent from my ONEPLUS A6013 using Tapatalk

A UK bike then. [emoji846] Sent from my ONEPLUS A6013 using Tapatalk

250 EUR seems a tad excessive.... Even with the increase in freight charges due to covid [emoji12] Sent from my ONEPLUS A6013 using Tapatalk

Thanks for the knowledge. Tank off this weekend [emoji849] Sent from my ONEPLUS A6013 using Tapatalk

Trying to find the source of a little oil leak! Yes...I know [emoji846] It seems to develop mainly on the right side of the engine. I carried out an oil change and service recently and set the valve gaps. I renewed the cam cover gaskets at the time.. I've checked the torque on the heads and visually the gasket seal seems fine. Head gaskets also seem ok. The leak seems to come from under the tank down into the engine but as I say mainly on the rh side. I'll take the tank off next and check the breather hose etc. If be grateful for any help with the diagnosis [emoji846] Jimmy Sent from my ONEPLUS A6013 using Tapatalk

So year identifier on frame is a Y which seems to make it a 2000 bike, type KR and frame number 112219. [emoji106] Jimmy Sent from my ONEPLUS A6013 using Tapatalk

Hi doc. I should have known better than to be a bit lazy and vague about the build year on this group 😀 You are absolutely correct of course. Jimmy

Hi guys and thanks for all your input... That's put my mind at rest... On with the tune up! Sense of achievement getting the fairing decal on straight today. Tiny steps! [emoji2509][emoji106] Sent from my ONEPLUS A6013 using Tapatalk

Made a loom to read my TPS. Plugs from kojaycat https://kojaycat.co.uk/epages/950000457.mobile/en_GB/?ObjectPath=/Shops/950000457/Products/150-3W-BLK-MAL&ViewAction=ViewProduct Sent from my ONEPLUS A6013 using Tapatalk

Can anyone tell me what 2 breather tubes threaded through this guide attached to the sump plate and where they are attached? I dismantled the bike some time ago and recall there being breather tubes held in place by this fitting. I can't seem to find them referenced in any manual I have. It's a 2001 V11 Sport Sent from my ONEPLUS A6013 using Tapatalk

Available here: http://web.archive.org/web/20091022090139/http://geocities.com/motoguzzi1064/GuzziFiles/SuspensionSetUp.htm