Jump to content

dale-j

Members
  • Posts

    36
  • Joined

  • Last visited

Profile Information

  • Location
    British Columbia, Canada
  • My bike(s)
    2004 V11 LeMans

Recent Profile Visitors

560 profile views

dale-j's Achievements

Guzzisti

Guzzisti (2/5)

1

Reputation

  1. dale-j

    dale-j

  2. L380 (Turkis). Turquoise is the direct translation, but more mossy/minty green than Turquoise. Hubert, with a Standard you'll see a lot more of your paint inside, too. Standards are pretty rare in Canada but very cool with the smaller headliner etc.
  3. Here you go... my distraction for the summer so I don't think too much about riding...
  4. Thanks guys for the kind words. Sports Car, not exactly Foto. I like aircooled engines with pushrods (recognize a theme?), and taking the time I would have spent riding this summer I might actually finish a 20 year project (oops, 24 years this year actually) to get a 1963 (1192cc 34bhp) Volkswagen Beetle back on the road. Old and slow, just like I'm getting - at least that's what it feels like at the moment. I do help my father out occasionally ;)' when he needs a sedan, by trading him the 550i you see in the background of one of the pics up there for his 335is turbo cabriolet. I love the power-brakes-handling-back seat, but honestly the Miata is a more fun car to drive. That one looks really clean, too. I love those things, the feedback is probably the closest thing (short of a Lotus) to a motorcycle that you'll find on four wheels. Bello, the appalling thing here is that this one happens to be the opposite.... I'm 43, and the guy who bought my bike purchased it as a retirement present for himself - and he's in better health that I am. Geez, doesn't look any older either, although I suspect if he grew out his beard too it might have more 'blond' highlights than I do ;)' Someday I hope to have it turned around and get back on a bike, though. Someday... even if it doesn't, the plan is that when my two daughters are moved out and independent, some risks will be more tolerable than they are today. Could be 12 or 15 years, but holding the hope (and the get out of jail 'bike' card) in my pocket will be enough to keep me for now.
  5. dale-j

    New Battery

    OK, found the info on the battery. There is a bit of a catch versus what the Ballistic site lists. from my order info: _______________________________________________________ A brief note if you're in touch with Ballistic Performance, I have a 2004 Moto Guzzi V11 Lemans, which they list as taking a 16 cell unit. The 12 cell exceeds the capacity and specs of the stock Yuasa YTX15L battery on every front (an 8 cell probably would even have worked), and there is no way a 16 cell would have fit. I think they are a bit mixed up in their fit guide, as the 16 cell is replacement for a Yuasa YTX30 not the YTX15. _______________________________________________________ 1 Ballistic Battery 12 Cell EVO 2 Lithium (2lb 5oz) for Built 1000cc, Big Twin Motorcycles Type: L, - left, + right Your motorcycle: 2004 Moto Guzzi w/ YTX15L I ordered it from www.solomotoparts.com and the service was great.
  6. dale-j

    New Battery

    I would highly recommend the Ballistic 12 cell Lithium Ferrite. Super light, compact enough to add a tire plugger, PC3 and small tool kit in the area vacated under the seat, and very low resistance so it cranks the big lump over RIGHT NOW, and recharges super fast too. The only caveat I would give is if you store your bike outside in cold (sub-freezing) weather and want it to start. Never and issue for me (fair weather garage queen) but for some it might be. I'll try to find the model number and post it up.
  7. Due to several months of medical issues and some apparently permanent solutions (blood thinners) that will make riding exceedingly risky, I've reluctantly given up riding. I hope for the short term, and that there will be a solution sooner than later. In the interim, it has made me frustrated to keep looking at my beauty LeMans in the garage and the sunny weather begging for a ride, and so I recently posted an ad to sell the bike. It has sold - quickly and with more interest than I expected, which is a bittersweet event for me. I'm pleased to report that the purchaser of the bike is well qualified to take good care of her, arriving on a very nicely kept 1982 R100RS BMW airhead that he purchased new in 1982 and had nearly 200,000 km of riding on the clock. The Guzzi is IMO the perfect upgrade in style, handling, power and braking - and none of the foibles related to a transverse engine, an aircooled pushrod engine, dry automotive style clutch or shaft final drive will surprise him. The improvement in cornering clearance from the BMW might though My sincere thanks to those here who have so generously assisted in helping me get the bike sorted and keep it running beautifully over the past few years, especially Kiwi Roy who went so far as to show up at my house on a Saturday with multimeter in hand and walk me through the process for TPS calibration on the V11. My brother in law is keeping his red frame V11 Sport - so not all is lost for me, and I hope that Gary Z (her new owner) will pop in and become a new member here so that you'll all know the bike remains in good hands. If I can figure it out I'll get him to post up his username here. I'll still pop in from time to time, and if there's anything that I've tackled that others can benefit from I'd love to assist. Steve
  8. dale-j

    Centre stand

    I don't have one permanently fitted to the bike, but I have a Becker Technik service stand that mounts to the lower pivot bolts (18mm) on the pork chops. Works very well and goes on and off easily. Very close to the balance point so all it takes is a little lift from the front and block of wood under the sump to have both wheels safe and stable up in the air. Unlike the factory centerstand on my brother in law's V11 Sport, the rear is high enough to remove the wheel and replace tires at both ends at once. As there is not a regular need to do chain maintenance as with other bikes, I'm happy to put it on and take it off when needed for service and to rely on the sidestand. One less thing to ground out when cornering IMO. Instructions available on line for the stand are limited, and the photocopy that comes with it is not much better. Thankfully, it's easy to figure out and MG Cycle was able to get one in stock quickly for me. Steve
  9. Just went back to my notes and the bike tonight, and for one, I gave the wrong numbers, prior to dialing in the preload on the caps. That *was* 40mm and 50mm, but with the preload caps maxed I have 30mm sag just the bike, and 40mm (or 38mm depending on which direction you measure) with me on it when rechecking tonight. Doesn't seem quite right but it really doesn't seem to move much by my weight... then again I'm not wearing my gear either. Even when I bounce it and release slowly it comes back up right close to the static sag point. Now you have me thinking that the PO (a bigger guy who liked the corners) may have managed to change springs without marking up the caps the way I did (oops), I'm going to look more carefully at them when I open up the forks to change the spacers, and I'll take some pictures. They *may* not be original after all, they did not look like the tapered ones I saw in the link posted on the other thread. By the way, this is the front forks, no gas pressure that I know of other than 1 bar of atmospheric when I close them up. Rear shock is behaving a little more normally, with 18mm static and 36mm of rider sag. I will add a little preload to this but generally seems to be working close to right in the back. The good news is that it looks like I *do* have a firmer spring and less compression damping now. Maybe. The fork definitely doesn't seem to be binding, lots of smooth travel on the brakes now that I have the lighter fluid and very little evidence of stiction in the measurements (which is a surprise given what i've read about the Marzocchi's). Going to pull them and see if I can figure out how to disassemble the fork caps from the cartridge on the weekend, more news then
  10. I have a Tekno bag that was apparently designed for the V11. With my modified (raised, swept back and closer set up) adjustable Tommaselli clip ons I can't use it, it's so big. Not a fantastic bag, the strap mounts allow it to slide around and it is not a grippy (or removable) base but I'm sure that you could find one somewhere on your side of the pond and maybe just add some grippy stuff to the bottom. I have pictures if you want to flip me an email steve at dale-johnson dot ca
  11. I have a Becker Technik (spelling?) workshop stand from MG Cycle. It took me a few minutes to figure it out due to the lack of clear instructions, but I absolutely love it. Rather than a fancy prop stand for the front, once I have the bike up on the Becker 'centerstand" I simply put an old Toyota scissor jack under the sump and it can be turned by hand to take the weight off both wheels at once. The stand does require two 1/2" drive, 18mm sockets to mount to the swingarm/pork chop nuts, that you then won't be able to use to work on the bike, but so far no issues with that.
  12. Hmm, with a measured travel (unless I did it wrong?) of 123mm the Lemans does have more total travel than the 100mm I've seen batted around in sport bike discussions, so maybe a bit more sag is not bad on this bike. 30% would be about 36mm so I may only need to add a half inch to my preload.... but then still, my static sag would still be quite a lot at over an inch. The tire on the rim issue is one that we're also looking at. My brother in law's red frame bike runs a 160 (/70??) in place of the 170/60 and handles very well as a result. With the wider rim on my bike I have contemplated a similar reduction to a 170/60 but at this point the front tire has pretty similar errrrrr... 'reserves' left. As far as compression damping, I've just gone the other way to good effect, replacing the oil with 7w Lucas Synthetic fork fluid. It has helped with high speed compression damping harshness and jitters in quicker corners, and I have raised the oil level a bit to provide some additional progressiveness and resistance to bottoming. That part I'm very happy with so far.... thankfully there is lots of rebound damping adjustment in my fork so I've been able to compensate for the thinner oil just fine. I think I'd rather have a slightly too stiff spring than slightly too stiff compression damping, so if the preload doesn't put the front end up in the target range I will definitely look at springs. That said, with the amount of static sag I have I don't *think* it's spring rate, I think it's preload.
  13. I may have underestimated the gear, but I'm about 170 so maybe 180 in leathers etc? With the cap adjustments maxed out, static sag is 40mm, rider sag in front is 50mm. What I need is to get the static sag from 40mm to my 10-15mm target and I think the rider sag will be dialed in. If I get there on the static and it's not as linear as I think with matching rider sag, then I'll start looking at spring rate but right now the static sag needs a big bump in preload. Rear sag is currently a tiny bit high, I'll have to recheck my numbers tonight but I think static was 22mm and 34 mm rider sag. I was shooting for 30mm in rear but as you suggest 25mm might be a better target as it will allow some weight to be added to the Hepco bags without upsetting the balance. I will put a little more preload on the shock when I get the fork dialed in, but right now it's already a bit too firm for the fork. I do have a subtantial amount more preload available on the shock without any modification, and with the high static sag again I think (*think*) the spring rate is OK, or at least pretty close.
  14. Sometimes the simplest solution is staring right at you. Jaap and Baldini, thanks for jumping in with what should have been an obvious solution. With the sag and a bit more clearance from the rubber I think I'll be good.
  15. Hey KB. I initially thought the same but it appears that here this is not the case when I got in to the actual measurements. To summarize my limited knowledge of sag, you want a 'static' sag without rider of 10-15mm to allow some top out resistance, and a sag with rider (varies by taste) of 25-30mm. If you need to add so much preload for the rider weight that at the recommended rider sag there is not sufficient 'static' sag then as you say the springs are too soft. In this case, the problem is insufficient factory preload for the weight of the bike in the front fork. Mine sitting without rider sags 40mm (!) at full preload on the cap adjusters, and adding my 175 lb weight it goes only to 50mm. As an aside - now rechecking my numbers I can see why the kickstand drags in lefts .... oops. If preload was totally linear, this would look like the springs were borderline too stiff for me. Seeing as it's not totally linear, adding about an inch and a quarter (32 mm)... or maybe even and inch and a half of preload should allow the bike to rest at a static height of approximately 10mm, right in the zone for static sag and with more available by releasing some of the cap adjustment that's maxed now if I overshoot it a bit. Assuming no adjustment this will provide a rider sag of approximately 18mm - maybe a hair too stiff. Backing off the caps to provide 15mm static sag would have me bang on where I want to be, as it isn't actually a 1 to 1 between preload and ride height, it takes a bit more spring compression than 1:1 I'm sticking with the springs as stiffer would further exacerbate the issues I'm having with high speed compression harshness, but what I do need clearly here is a bit more preload - not more spring. Together with the lighter fork oil improvement on the compression issue already (thankfully lots of rebound adjustment to compensate for the thinner oil) I think this will exorcise my handling demons.
×
×
  • Create New...