Tom M Posted July 17, 2007 Posted July 17, 2007 Dr Know was one: http://www.v11lemans.com/forums/index.php?...c=11659&hl= RichPugh was another: http://www.v11lemans.com/forums/index.php?...c=11578&hl= Congrat's on the Scura Pete!
dlaing Posted July 17, 2007 Posted July 17, 2007 dlaing is interested http://www.v11lemans.com/forums/index.php?...11578&st=15 Mine even comes with a light alloy bearing spacer! But it does have a lot of scratches from tire changes. So, you might want to swap with one of the other guys. Plus they probably want it more baddly I guess all the narrow rims will come in silver, so you will probably want to paint it. I don't care about the color not matching
pete roper Posted July 17, 2007 Author Posted July 17, 2007 I guess all the narrow rims will come in silver, so you will probably want to paint it. I don't care about the color not matching Well, it'll be a while before it's available as the bike has to get to or be got to Houston then while it's being re-clutched the wheel can be flogged out and sent to whoever wants it and theirs can be sent back. The whole poxy bike will probably have to sit in a corner for a while as it'll be getting its forks and shock sent of for overhaul and re-springing. Like you Mr Laing I'm not too fussed that the wheels will be different colours. Anyway, I can fix that when I get back to Oz with a couple of cans off rattlecan black . Round and less than gouged is more important to me! Actually I think that painting or powdercoating them some colour to upset the purists would be most fun. Yellow, pink, lime green? Pete
Skeeve Posted July 17, 2007 Posted July 17, 2007 ... I think that painting or powdercoating them some colour to upset the purists would be most fun. Yellow, pink, lime green? Mmmm, yellow w/ the Scura's natural flat black would make for a nice "bumblebee" f/x! Me likey...
FuelCooler Posted July 17, 2007 Posted July 17, 2007 Wanna swap? I want a skinny one! pete FuelCooler expressed some interest as well: http://www.v11lemans.com/forums/index.php?...st&p=125056 But the others listed above are all ahead of me. If by any crazy luck they all refuse it, my offer stands. Steve
callison Posted July 17, 2007 Posted July 17, 2007 I've got a front and rear skinny set that could be sent off for powder coating prior to your arrival. I don't want a wide wheel though for the same reasons as you. Horse trading around would probably cure that. jma is the guy looking for the wider rim.
RichPugh Posted July 18, 2007 Posted July 18, 2007 One was me... I'd like to get a 5.5" rear and will gladly swap for my 4.5"
todd haven Posted July 18, 2007 Posted July 18, 2007 I'd like to get a 5.5" and will gladly swap for my 4.5" And what guy wouldn't? Sorry, I tried to resist.
pete roper Posted July 18, 2007 Author Posted July 18, 2007 And what guy wouldn't? Sorry, I tried to resist. When you're hung like an elephant's trunk holding a melon 5.5 doesn't even start getting to the width! Well YOU started it Haven Pete
Jap In OZ Posted July 19, 2007 Posted July 19, 2007 hi Pete, Congrats on the scura!! And good luck importing!! I can tell you it is lots of fun Took me the best part of two months to get it regiseterd in OZ (QLD) good luck with it mate! Jap
BRENTTODD Posted July 24, 2007 Posted July 24, 2007 Wanna swap? I want a skinny one! pete i might be interisted what size is it let me know brent200x@yahoo.com
RichPugh Posted August 2, 2007 Posted August 2, 2007 And what guy wouldn't? Sorry, I tried to resist. Well I'd really be ok with a 6" but not too many of those around these Italians LOL
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now