slowkitty Posted February 12, 2008 Share Posted February 12, 2008 Not much of a tale .. mine vibrated off the bike. yes, it happened! Now for the real questions: a. Any non Guzzi bike out there with similar bar-ends? b. Where can I buy them originals and how much? Thanks for the help, guys. Cheers Cat Link to comment Share on other sites More sharing options...
roberto tenni Posted February 12, 2008 Share Posted February 12, 2008 Should still be available through your local friendly Guzzi dealer. Depending on the model, the cost should be around £8.00 - £18.00 each. Link to comment Share on other sites More sharing options...
Greg Field Posted February 12, 2008 Share Posted February 12, 2008 At Moto Intl., we offer a set that are heavier and do a better job . . . or we may have the stock ones, depending on what year and model your bike is. Link to comment Share on other sites More sharing options...
mdude Posted February 13, 2008 Share Posted February 13, 2008 I would love to get rid of my barends and put some mirrors in there instead, but I just cant get the bloody things off. Unlike SlowK's, mine have vibrated themselves ON. I grip the bar with a suitable plier and try to screw the barends off, but I end up twisting the bar itself and dont dare to use more force on it. Stuck. Tried several times. Any clues to a solution? Link to comment Share on other sites More sharing options...
Admin Jaap Posted February 13, 2008 Share Posted February 13, 2008 I have some used lying around. You can have them for shipping costs. You only need the weights? Link to comment Share on other sites More sharing options...
slowkitty Posted February 13, 2008 Author Share Posted February 13, 2008 I have some used lying around. You can have them for shipping costs. You only need the weights? Great stuff, Japp, what I see now (from the diagram) is the hex screw [26] is still holding the handle in, a pen-size metal tube [28] which should go into the bar-end. This tube has a hole across it, probably for a pin [20] which went with the bar-end. I am not sure if [27] is still there. I can probably fashion another pin using my other side's pin as a sample if you do not have it. Please let me know how much to Singapore and I will PayPal the shipping to ya. Thanks loads, I am grateful for this. Cheers Cat Link to comment Share on other sites More sharing options...
dlaing Posted February 13, 2008 Share Posted February 13, 2008 Any clues to a solution? Ship your bars to Slowkitty for an exchange! (assuming they are both the same type) ...and you might have to leave the rubber grips on. Link to comment Share on other sites More sharing options...
mdude Posted February 14, 2008 Share Posted February 14, 2008 Ship your bars to Slowkitty for an exchange! (assuming they are both the same type) ...and you might have to leave the rubber grips on. not the same, mine are the big lumps of corroding whatsamagonnacallit Link to comment Share on other sites More sharing options...
waspp Posted February 14, 2008 Share Posted February 14, 2008 If needed I have parts 28, 27 and know that 20 is just a simple roll pin easily obtained. I installed new high rise clip ons and had to fab up the stock weight with other "things". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now