Tekno bag bracket fitment

[MArkS]

Hi all!

I just got a set of used Tekno bags which had been fitted to a 2002 LeMans. I have tried holding the brackets in various positions without satisfaction. The one which seems closest is upper front to outside of front passenger peg bracket, lower front to inside of muffler mount and rear stay to license plate light bolt inside rear mudguard. The geometry looks right, but results in the top rail contacting the seat base. Did Tekno provide spacers which I am missing (or am I missing something else?). Any Tekno owners out there who can offer advice/photos, I would appreciate it. These are going on an '02 Tenni if that makes any difference.

Thanks,

Mark

[docc]

Yes, they were supplied with spacers of about two inches for the top front mount. Many of us found they were too long and shortened them. Mine are now one inch and hold the bags close and level. They are just mild steel tube stock.

[MArkS]

Yes, they were supplied with spacers of about two inches for the top front mount. Many of us found they were too long and shortened them. Mine are now one inch and hold the bags close and level. They are just mild steel tube stock.

Thanks for the quick reply.What do you use to protect the footpeg/muffler bracket?

Thanks again,

Mark

[docc]

I've moved mine inside the muffler bracket. No protection . . .