Kit cylinders for GUZZI 94.5mm high compression pistons

[nuevototem]

HI to all

 

Anyone with experience with this:

 

http://www.gg2.it/Inglese/guzzi_cyl_air%20cooled.htm

 

Best regards!

[Lucky Phil]

HI to all

 

Anyone with experience with this:

 

http://www.gg2.it/Inglese/guzzi_cyl_air%20cooled.htm

 

Best regards!

No but cast iron sleeved cylinders are a backward step from the std Nikasil.

Ciao

[kalev11]

My v11 has the FBF high compression drop in piston kit. I now have 35000 miles on it , all is well. They say you gain a horse or two and the compression ratio is 11.3 to 1 if I remember right. The jug is stock. FBF had an entire kit for the bike back then and may still have ; with nice slip ons , PC3 with custom map and the sort .

[Fritz]

I have experience with forged pistons in a Guzzi  . Long lasting but, there will be more oil consumption than cast pistons and the forged pistons are noisy. Both of these issues are due to the increased piston to cylinder clearance the forged piston need.