Jump to content

Recommended Posts

Posted

Thankya thankya   :)

Hopefully, what we've collectively learned will work. I'm passing the baton to Scud.

Posted

Thankya thankya   :)

Hopefully, what we've collectively learned will work. I'm passing the baton to Scud.

Thanks Chuck for the lesson in springs. I recently moved house and decided to let go of a lot of stuff I had accumulated over the years the most painful of which was my grandfathers American Machinists handbook, the addition I cant remember but from the 50's I believe. Seeing you refer to it made me regret the decision even more.

 

Ciao 

Posted

Damn, I just found this thread, and I'm completely overwhelmed! Very cool of you guys to figure this out and build some springs! 

 

What happens from here if they work out perfectly in the real world for testing? Will Chuck build more, or will you place an order with a spring company? Either way, I'll gladly pay a good amount for one of these springs for my bike!

Ken

Posted

Damn, I just found this thread, and I'm completely overwhelmed! Very cool of you guys to figure this out and build some springs! 

 

What happens from here if they work out perfectly in the real world for testing? Will Chuck build more, or will you place an order with a spring company? Either way, I'll gladly pay a good amount for one of these springs for my bike!

Ken

Well, the next thing to do is I'll make up a couple to send to Scud for "real world" testing to make sure they'll work in the bike. He said early on, though, that he didn't want to be a spring purveyor.. and I don't blame him. I spent a *lot* of time doing paperwork on the Lucky Phil shifter extenders. Out of country is the worst with having to fill out customs declarations in triplicate, taking them to the post office, and waiting while they fill out customs declarations in triplicate. (!) He mentioned maybe having MG cycle stock them.. but I don't know if they ship over seas.

It's still too early to worry about that, though. We'll have to wait until Scud gives the yeah or meh.  

ps, if we order 20,000 we can get them for $.09 each.  :whistle:

Posted

sorry, I shouda mentioned that I replaced it with a 15mm. The other bike, I filed down to 14.9mm while waiting for the new arm. It can be filed with a good file and some patience (time). As I've mentioned, I've had two '02 LM's and they both had the 16+mm boss. This could still create problems for those using the new spring, if it's not changed out.

Posted

 

 

This would still create problems for those using the new spring, if it's not changed out.

FTFY.

  • Like 1
Posted

 

 

 

This would still create problems for those using the new spring, if it's not changed out.

FTFY.

 

 

LMAO... I had to look up FTFY....    :homer:

Posted

 

ps, if we order 20,000 we can get them for $.09 each.  :whistle:

 

 

Great, what are we going to do with the 19,000 extras?

Posted

That would probably be 19950..  :rasta:

 

I was trying to be optimistic.

 

But back to the distribution model. If someone wants to set up an ebay store and sell these things I believe ebay can help manage the shipping and customs. I think it would mostly be putting them in a bag and getting them picked up.

 

50 of them at $1 ea to get them made and sell for $5 would almost make it worth the effort. Stock ("updated") spring from Moto International is $1.84. Who wouldn't pay $5 for a spring that didn't break?  :oldgit:

 

You do know the next thing we're going to ask you to make, Chuck...  :notworthy:

 

original-17-17-bail-for-v11-side-stand.j

  • Like 2
Posted

fwiw to me... the stock spring is worth $Zero.00   If I had not already "potentially" permanently fixed my own spring, I would likely pay whatever it cost for a ScudChuck spring. I want to buy one anyway, to contribute to a very worthy cause... and, so I will own one :)

 

50 for $50 is very optimistic. :rolleyes:  

 

  :notworthy::luigi:

Posted

 

50 for $50 is very optimistic.  :rolleyes:  

 

Uhh, yeah. Early on in this project, I think Scud was talking around $300 to get 25 made. I'm guessing the world demand is somewhere between 50-100.   :) There's not a lot of money to be made on Guzzi parts.. MGCycle wants $8.63 for it.

Posted

So $20 for a spring that won’t brake?

 

Not the worst job to replace one of these springs but a few precious hours wrenching/riding. Totally worth it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...