Pressureangle Posted September 28, 2019 Posted September 28, 2019 (edited) Most of you probably follow the Redux thread, but I wanted to move the pertinent info to the top where it's not buried 7 pages deep. Pete Roper licensed sloppage trays for V11 broad-sump motors, US-made in 304 Stainless Steel .075" thick. $85 US. Pete gets $20. Edit; 3/23/25 New supplier, I can order singles at the same price. I've sourced 2mm longer bolts (12 short, not 4 long) for the upper pan to keep thread engagement through the plate and additional gasket. I've sourced Viton O-rings for the oil cooler pipes; I discovered mine were harder and uncomfortably loose in the bores. I've stocked upper and lower gaskets I can include all of the above for $135 US including shipping to North America. International shipping is $125 US plus actual shipping. Edited March 23 by Pressureangle info 2 3
docc Posted September 28, 2019 Posted September 28, 2019 Such appreciation to all involved to make this a reality and honor Pete Roper. Once I saw the engraving, It thought, "I gots-ta get me one o' them to go with my original MotoModa!" [Pinned Topic] 1
Frank Posted September 28, 2019 Posted September 28, 2019 Pressureangle, I've just sent an order with PayPal. Are there instructions included? What gaskets -seals are needed? Thanks. Frank
Pressureangle Posted September 28, 2019 Author Posted September 28, 2019 On 9/28/2019 at 3:51 PM, Frank said: Pressureangle, I've just sent an order with PayPal. Are there instructions included? What gaskets -seals are needed? Thanks. Frank Expand You'll need 2 upper gaskets and one lower gasket, unless you can save the upper that's already in the bike. Swooshdave has made a super video on the installation.Swooshdave's awesome Roper Plate install video 1 1
gstallons Posted September 28, 2019 Posted September 28, 2019 No , it is a ( careful ) easy installation , I posted a long time ago , this is the best money spent on a mod you will never ( well almost ) see . 1
docc Posted September 28, 2019 Posted September 28, 2019 On 9/28/2019 at 6:03 PM, Mikko said: @docc So you currently run a plate? Expand My MotoModa plate is presently a proud part of my shop decor . . . 2
swooshdave Posted September 29, 2019 Posted September 29, 2019 On 9/28/2019 at 6:03 PM, Mikko said: Isn’t there some adjustments to be made to the kick stand also? Expand If you watch my video you'll see what you need to do for the side stand. Short answer is you loosen the side stand brackets and there's enough play to get it to go right back together.
swooshdave Posted September 29, 2019 Posted September 29, 2019 On 9/28/2019 at 4:02 PM, Pressureangle said: You'll need 2 upper gaskets and one lower gasket, unless you can save the upper that's already in the bike. Swooshdave has made a super video on the installation.Swooshdave's awesome Roper Plate install video Expand Awesome is a little generous. Serviceable is more like it. 1
swooshdave Posted September 29, 2019 Posted September 29, 2019 On 9/28/2019 at 3:51 PM, Frank said: Pressureangle, I've just sent an order with PayPal. Are there instructions included? What gaskets -seals are needed? Thanks. Frank Expand http://www.mgcycle.com/index.php?main_page=product_info&cPath=170_174&products_id=34 http://www.mgcycle.com/index.php?main_page=product_info&products_id=33 2
80CX100 Posted October 7, 2019 Posted October 7, 2019 Hey Eric, I was following the other Redux thread; I just wanted to confirm that you received my paypal to your email a few days ago. Please just send me a pm if it went through ok. Definitely no rush, I just wanted to confirm it wasn't lost in cyber space,lol. Tks very much to you and everyone else involved to see it through to the end. Kelly
Pressureangle Posted October 7, 2019 Author Posted October 7, 2019 On 10/7/2019 at 4:56 AM, 80CX100 said: Hey Eric, I was following the other Redux thread; I just wanted to confirm that you received my paypal to your email a few days ago. Please just send me a pm if it went through ok. Definitely no rush, I just wanted to confirm it wasn't lost in cyber space,lol. Tks very much to you and everyone else involved to see it through to the end. Kelly Expand Yes, received. I had houseguests and was away a few days. Your plate should make it out in today's mail. Eric 1
Admin Jaap Posted October 9, 2019 Posted October 9, 2019 On 9/30/2019 at 7:17 PM, Mikko said: Just got mine!! Had to shine it up to make Docc a little jealous Expand Love the V11LeMans.com 2 1
hammershaug Posted October 9, 2019 Posted October 9, 2019 Do I need one of these?Going to unmount the oil pan for cleaning and inspection anyway, so...Sent from my iPhone using Tapatalk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now