EAB Posted Tuesday at 01:43 PM Share Posted Tuesday at 01:43 PM (edited) Hi everyone, I'm a proud member of the group and also run a store in which we are bringing more upgrades for Guzzi models as time goes by. The product can be found in the following link https://elefantadventurebikes.com/moto-guzzi/moto-guzzi-stelvio-clutch-slave-cylinder/ We now have the Oberon Performance Clutch Slave Cylinders mostly for the Stelvio but they are also compatible with the following models: Moto Guzzi Audace 1400 2015-2017 Moto Guzzi California 1400 2012-2017 Moto Guzzi Eldorado 1400 2015-2018 Moto Guzzi Griso 1200 2007-2017 Moto Guzzi Norge 1200 2010-2016 Moto Guzzi Sport 1200 2008-2013 Moto Guzzi Stelvio 1200 2008-2017 Thanks for looking and let me know if anyone has questions! Edited yesterday at 09:46 PM by EAB Fixed link 1 1 Link to comment Share on other sites More sharing options...
Tomchri Posted Tuesday at 08:02 PM Share Posted Tuesday at 08:02 PM Can't open the link. Cheers Tom. 1 1 Link to comment Share on other sites More sharing options...
docc Posted Tuesday at 10:17 PM Share Posted Tuesday at 10:17 PM https://elefantadventurebikes.com/moto-guzzi/moto-guzzi-stelvio-clutch-slave-cylinder/ This link is to the Stelvio /etc part. @EAB, can you source a clutch slave for the V11 Sport/LeMans spine frame series? Otherwise, can this slave be fitted to the V11 6speeder and use the extra hydraulic connection for the bleeder upgrade line that brings the bleeder up under the seat of a V11 SpineFrame like the later CARC bikes? 1 Link to comment Share on other sites More sharing options...
po18guy Posted yesterday at 12:48 AM Share Posted yesterday at 12:48 AM (edited) -OR- you can install a bleeder banjo bolt at the high point in the system, the clutch master. I did that and it eliminated the air problems. https://raceboltuk.com/titanium-c4/titanium-banjo-bolts-c1188/racebolt-titanium-banjo-bolt-m10-x-1-00mm-single-with-6mm-bleed-nipple-p45227#attribute[12]=163 Edited yesterday at 04:50 AM by po18guy 4 Link to comment Share on other sites More sharing options...
EAB Posted yesterday at 09:46 PM Author Share Posted yesterday at 09:46 PM On 9/17/2024 at 3:02 PM, Tomchri said: Can't open the link. Cheers Tom. Fixed it Tom, thanks for pointing it out! 1 Link to comment Share on other sites More sharing options...
EAB Posted yesterday at 09:48 PM Author Share Posted yesterday at 09:48 PM 23 hours ago, docc said: https://elefantadventurebikes.com/moto-guzzi/moto-guzzi-stelvio-clutch-slave-cylinder/ This link is to the Stelvio /etc part. @EAB, can you source a clutch slave for the V11 Sport/LeMans spine frame series? Otherwise, can this slave be fitted to the V11 6speeder and use the extra hydraulic connection for the bleeder upgrade line that brings the bleeder up under the seat of a V11 SpineFrame like the later CARC bikes? Hi docc, let me talk to the crew at Oberon and see what they can do for us. We sell a ton of cylinders for many brands and we are always talking about the models that would benefit from upgrades. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now