Moto Guzzi Clutch Slave Cylinders

[EAB]

Hi everyone,

I'm a proud member of the group and also run a store in which we are bringing more upgrades for Guzzi models as time goes by. The product can be found in the following link https://elefantadventurebikes.com/moto-guzzi/moto-guzzi-stelvio-clutch-slave-cylinder/

We now have the Oberon Performance Clutch Slave Cylinders mostly for the Stelvio but they are also compatible with the following models:

Moto Guzzi Audace 1400 2015-2017
Moto Guzzi California 1400 2012-2017
Moto Guzzi Eldorado 1400 2015-2018
Moto Guzzi Griso 1200 2007-2017
Moto Guzzi Norge 1200 2010-2016
Moto Guzzi Sport 1200 2008-2013
Moto Guzzi Stelvio 1200 2008-2017

 

Thanks for looking and let me know if anyone has questions!

Edited September 18 by EAB
Fixed link

[Tomchri]

Can't open the link.

Cheers Tom.

[docc]

https://elefantadventurebikes.com/moto-guzzi/moto-guzzi-stelvio-clutch-slave-cylinder/

This link is to the Stelvio /etc part.

@EAB, can you source a clutch slave for the V11 Sport/LeMans spine frame series?

Otherwise, can this slave be fitted to the V11 6speeder and use the extra hydraulic connection for the bleeder upgrade line that brings the bleeder up under the seat of a V11 SpineFrame like the later CARC bikes?

 

 

[po18guy]

-OR- you can install a bleeder banjo bolt at the high point in the system, the clutch master. I did that and it eliminated the air problems.

https://raceboltuk.com/titanium-c4/titanium-banjo-bolts-c1188/racebolt-titanium-banjo-bolt-m10-x-1-00mm-single-with-6mm-bleed-nipple-p45227#attribute[12]=163

Edited September 18 by po18guy

[EAB]

On 9/17/2024 at 3:02 PM, Tomchri said:

Can't open the link.

Cheers Tom.

Fixed it Tom, thanks for pointing it out!

[EAB]

23 hours ago, docc said:

https://elefantadventurebikes.com/moto-guzzi/moto-guzzi-stelvio-clutch-slave-cylinder/

This link is to the Stelvio /etc part.

@EAB, can you source a clutch slave for the V11 Sport/LeMans spine frame series?

Otherwise, can this slave be fitted to the V11 6speeder and use the extra hydraulic connection for the bleeder upgrade line that brings the bleeder up under the seat of a V11 SpineFrame like the later CARC bikes?

 

 

Hi docc, let me talk to the crew at Oberon and see what they can do for us.  We sell a ton of cylinders for many brands and we are always talking about the models that would benefit from upgrades.