V11 kickstand

[Randy]

I need a V11 kickstand, 2003-04.

[docc]

Just the "stick"/ #1 : SIDE STAND (#01432190), or some/all of the whole Rube Goldberg mechanism?

All sidestands were the same throughout the 1999-2005 V11 SpineFrame range?

[audiomick]

35 minutes ago, docc said:

All sidestands were the same throughout the 1999-2005 V11 SpineFrame range?

Maybe not. The parts lists at Wendel in Berlin show a change in the part number, at least for the "stick", around 2002. Subsequent lists refer to "Seitenständer V11 neu", i.e. "sidestand V11 new".

The first version, part no. GU02432100

https://wendelmotorraeder.de/fussrasten-v11-sportmandello-99-01-ex-30_3006_300602_30060201_3006020110_300602011003.html

https://wendelmotorraeder.de/fussrasten-v11-nakedle-manns-01-02-ex-30_3006_300602_30060202_3006020210_300602021003.html

and the new version, part no. GU01432190

https://wendelmotorraeder.de/fussrasten-staender-v11-02-le-mansskura-ex-30_3006_300602_30060203_3006020310_300602031003.html

https://wendelmotorraeder.de/fussrasten-staender-v11-03-04-corsa-ex-30_3006_300602_30060204_3006020410_300602041003.html

https://wendelmotorraeder.de/fussrasten-staender-v11-03-05-cafballabio-ex-30_3006_300602_30060205_3006020510_300602051003.html

 

However it seems that the new version might fit on the earlier models. Stein-Dinse only lists the newer part number. There is a comment in the list and in the listing in their shop "Nachfolgeprodukt für Artikel: 02432100", i.e. "replacement product for article: 02432100"

https://www.stein-dinse.com/de/moto-guzzi-seitenstaender-v11-le-mans-naked-ballabio/item-2-1020771-01432190-.html

and under "Geeignet für" i.e. "suitable for" they list pretty much all the V11 Models.

 

 

The thlot pickens....

 

Edited Sunday at 05:45 PM by audiomick

[docc]

Anyone with early and later V11s that could compare the sidestands, er "side-by-side"    ?

[Tomchri]

No measurement, looks the same. Black colored, looks different, sure the same.
Cheers Tom.

Sent fra min SM-S906B via Tapatalk

[audiomick]

6 minutes ago, Tomchri said:

... Black colored,

Ahh, I wondered about the colour. A different colour alone would explain the different part number, even if it is actually physically the same part.

[gstallons]

10 hours ago, Randy said:

I need a V11 kickstand, 2003-04.

Please include a little more information

[activpop]

Looked closely and measured both the 04 and the 01. Looks the same to me. 

[activpop]

Geez @Tomchri, when you gonna clean those things...

[Chuck]

9 hours ago, activpop said:

Geez @Tomchri, when you gonna clean those things...

Yeah, they are pretty rough all right.  Just a heads up if anyone hasn't noticed that they wear away on the back side. I made up a stainless "shoe" that fit over the Mighty Scura's foot and epoxied it on.

[Pressureangle]

3 hours ago, Chuck said:

Yeah, they are pretty rough all right.  Just a heads up if anyone hasn't noticed that they wear away on the back side. I made up a stainless "shoe" that fit over the Mighty Scura's foot and epoxied it on.

I discovered while adding a hardened bolt to the heel of mine that there's a steel core cast inside the leg. Too bad they didn't make it a steel foot.

Seems like they're hen's teeth- what happened? Is your mounting bracket ok?

Edited 16 hours ago by Pressureangle

[Tomchri]

12 hours ago, Chuck said:

Yeah, they are pretty rough all right.  Just a heads up if anyone hasn't noticed that they wear away on the back side. I made up a stainless "shoe" that fit over the Mighty Scura's foot and epoxied it on.

For now just welded on some more alu. My bikes have minimum time idling, so not much wear on my watch.

Cheers Tom.

[activpop]

OK @Tomchri, maybe my sarcasm doesn't go over big up North. My apologies.  Very nice lineup of bikes there! And one that looks like mine!