V11 kickstand

[Randy]

I need a V11 kickstand, 2003-04.

[docc]

Just the "stick"/ #1 : SIDE STAND (#01432190), or some/all of the whole Rube Goldberg mechanism?

All sidestands were the same throughout the 1999-2005 V11 SpineFrame range?

[audiomick]

35 minutes ago, docc said:

All sidestands were the same throughout the 1999-2005 V11 SpineFrame range?

Maybe not. The parts lists at Wendel in Berlin show a change in the part number, at least for the "stick", around 2002. Subsequent lists refer to "Seitenständer V11 neu", i.e. "sidestand V11 new".

The first version, part no. GU02432100

https://wendelmotorraeder.de/fussrasten-v11-sportmandello-99-01-ex-30_3006_300602_30060201_3006020110_300602011003.html

https://wendelmotorraeder.de/fussrasten-v11-nakedle-manns-01-02-ex-30_3006_300602_30060202_3006020210_300602021003.html

and the new version, part no. GU01432190

https://wendelmotorraeder.de/fussrasten-staender-v11-02-le-mansskura-ex-30_3006_300602_30060203_3006020310_300602031003.html

https://wendelmotorraeder.de/fussrasten-staender-v11-03-04-corsa-ex-30_3006_300602_30060204_3006020410_300602041003.html

https://wendelmotorraeder.de/fussrasten-staender-v11-03-05-cafballabio-ex-30_3006_300602_30060205_3006020510_300602051003.html

 

However it seems that the new version might fit on the earlier models. Stein-Dinse only lists the newer part number. There is a comment in the list and in the listing in their shop "Nachfolgeprodukt für Artikel: 02432100", i.e. "replacement product for article: 02432100"

https://www.stein-dinse.com/de/moto-guzzi-seitenstaender-v11-le-mans-naked-ballabio/item-2-1020771-01432190-.html

and under "Geeignet für" i.e. "suitable for" they list pretty much all the V11 Models.

 

 

The thlot pickens....

 

Edited yesterday at 05:45 PM by audiomick

[docc]

Anyone with early and later V11s that could compare the sidestands, er "side-by-side"    ?

[Tomchri]

No measurement, looks the same. Black colored, looks different, sure the same.
Cheers Tom.

Sent fra min SM-S906B via Tapatalk

[audiomick]

6 minutes ago, Tomchri said:

... Black colored,

Ahh, I wondered about the colour. A different colour alone would explain the different part number, even if it is actually physically the same part.

[gstallons]

10 hours ago, Randy said:

I need a V11 kickstand, 2003-04.

Please include a little more information

[activpop]

Looked closely and measured both the 04 and the 01. Looks the same to me. 

[activpop]

Geez @Tomchri, when you gonna clean those things...

[Chuck]

9 hours ago, activpop said:

Geez @Tomchri, when you gonna clean those things...

Yeah, they are pretty rough all right.  Just a heads up if anyone hasn't noticed that they wear away on the back side. I made up a stainless "shoe" that fit over the Mighty Scura's foot and epoxied it on.

[Pressureangle]

3 hours ago, Chuck said:

Yeah, they are pretty rough all right.  Just a heads up if anyone hasn't noticed that they wear away on the back side. I made up a stainless "shoe" that fit over the Mighty Scura's foot and epoxied it on.

I discovered while adding a hardened bolt to the heel of mine that there's a steel core cast inside the leg. Too bad they didn't make it a steel foot.

Seems like they're hen's teeth- what happened? Is your mounting bracket ok?

Edited 4 hours ago by Pressureangle