Specs

[Dan M]

This is just a thought for Jaap or AL. What about compiling a list of specifications, settings, torque values ect. and pinning them on the FAQ board? Not just factory specs but things that have been found by the collective wisdom of these pages. Factory specs, real world specs, suspension settings, tire pressures, fluid capacities & viscosities, ect. Not a how to page, just numbers.

wadaya think?

[jrt]

I'll start: Ratio of the circumference of the front wheel to its diameter:

3.14159

If it's off from that, you have troubles.

 

(sorry...I couldn't help it)

 

I think I have a page of standard torque values- I'll look and see.

[Martin Barrett]

I'll start: Ratio of the circumference of the front wheel to its diameter:

3.14159

If it's off from that, you have troubles.

 

(sorry...I couldn't help it)

 

I think I have a page of standard talk values- I'll look and see.

 

Jason I can help you with that:-

 

Barrett talks crap.

 

 

See what you've done, you've acted as the catalist that takes a reasonable request and causes the thread to go off topic and become nonsence. Sorry Dan it's in our nature.

 

Oh and what intervals are people changing the Redline?

[Admin Jaap]

As you will understand, I'm all for the idea of a specs page. But I'm way too busy to start such an undertaking, so any volunteers? There's a nice t-shirt for the person who will gather the info!

But...don't forget the different measurements!

[Alex-Corsa]

I can contribute a torgue chart for the 1100i

Then

Oils are here :

Rock Oil full synthetic 15-50W

or

MOTUL 300V Competition 15-50W

 

 

Gera Oil Castrol MTX 70-140W and or Motorex Gear 80-90W +HPLS additive for the back bevel.

BPR6EIX Iridium NGK spark Plugs. + NGK racing wires with plug cups Type CR5 part no8515.

 

I make my own chips for the ECU , so that's out of question for the specs.

What else?

[belfastguzzi]

There's a nice t-shirt for the person who will gather the info!

This is all going to end very badly.